![background image](http://html1.mh-extra.com/html/club-car/fe290/fe290_maintenance-service-supplement_2626734097.webp)
FE290 ENGINE
Cylinder Head
2000 FE290 Gasoline Vehicle Maintenance and Service Supplement Page 13-9
13
11. Disconnect oil filler tube (20) from cylinder shroud by first removing the locknut (18), ground wire (17)
and flange nut (10) and then pulling oil filler tube out of the crankcase cover (Figure 13-8, Page 13-10).
12. Remove the eight bolts (14) and the two-ended bolts (11 and 15) (Figures 13-7 and 13-8, Page 13-10).
13. Take off the head shroud (13), the upper shroud (23) and the bracket (22) (Figures 13-7 and 13-8,
Page 13-10).
ROCKER ARM AND PUSH ROD REMOVAL
1. Remove the two bolts (1) and remove the rocker cover (2) along with breather tube (3) (Figure 13-9,
Page 13-10). See following NOTE.
• MAKE SURE VEHICLE IS LEVEL BEFORE REMOVING FILLER TUBE. THIS WILL PREVENT OIL
FROM SPILLING WHEN FILLER TUBE IS REMOVED.
Figure 13-7 Head Shroud Removal
Figure 13-8 Upper Shroud and Oil Filler Removal
Figure 13-9 Rocker Cover Removal
Figure 13-10 Rocker Shaft Removal
• MARK THE ROCKER ARMS (6) AND THE PUSH RODS (8) SO THEY CAN BE PUT BACK IN
THEIR ORIGINAL POSITIONS (FIGURE 13-10, PAGE 13-10).
NOTE
TYPICAL 4
PLACES
11
14
15
14
12
13
TYPICAL 4
PLACES
22
14
23
17
18
21
20
19
10
Club Car
1
2
3
4
5
7
8
6
NOTE