ELECTRICAL COMPONENTS
Ignition Coil
Page 12-24 2000 FE290 Gasoline Vehicle Maintenance and Service Supplement
12
Ignition Coil Removal, Continued:
8. Remove the remaining four screws attaching the fan housing as shown (Figure 12-27, Page 12-24),
then while opening the housing, detach the spark plug wire grommet (5) from the housing and
(Figure 12-28, Page 12-24).
9. Disconnect the 18 gauge black wire (8) from the spade terminal on ignition coil (6) and remove coil by
removing two bolts (7) (Figure 12-28, Page 12-24).
Figure 12-25 Governor Guard Removal
Figure 12-26 Stiffener Removal
Figure 12-27 Fan Housing and Shroud Installation
Figure 12-28 Coil Installation
2
1
5
3
TRANSAXLE
MOUNTING PLATE
STIFFENER
BOLTS
ClubCar
LOCK NUTS
Loosen.
FAN SHROUD
FAN
HOUSING
Remove.
Remove.
Remove.
Remove.
2
4
3
5
6
8
7
1