TORQUE CONVERTER
Drive Clutch
Page 17-12 2000 FE290 Gasoline Vehicle Maintenance and Service Supplement
17
3. Install the starter/generator belt and adjust belt tension as instructed in Section 12 – Electrical System.
Tighten the starter/generator mounting hardware to 23 ft-lb (31.2 N·m) and the adjusting hardware to
13 ft-lb (17.6 N·m).
4. Install the drive belt as instructed on page 17-4.
5. Connect the battery cables, positive (+) cable first.
6. Connect the spark plug wire to the plug.
7. Drive the vehicle and check for proper operation.
Figure 17-16 Driven Clutch Assembly
2
3
4
5
6
7
8
11
12
1
10
9
TYPICAL
3 PLACES