![background image](http://html1.mh-extra.com/html/club-car/fe290/fe290_maintenance-service-supplement_2626734216.webp)
TORQUE CONVERTER
Drive Clutch
Page 17-4 2000 FE290 Gasoline Vehicle Maintenance and Service Supplement
17
DRIVE BELT INSTALLATION
1. Position the new belt on the drive clutch, then start the belt over the top of the driven clutch.
2. With the belt started onto the driven clutch, rotate the driven clutch counterclockwise and roll the belt
over the driven clutch sheaves and onto the clutch.
DRIVE CLUTCH
Read DANGER and WARNING on page 17-1.
Figure 17-3 Loosen Retaining Bolt
Figure 17-4 Drive Clutch Removal
• BE VERY CAREFUL WHEN HANDLING THE CLUTCHES. A CLUTCH THAT HAS BEEN
DROPPED WILL NOT BE PROPERLY BALANCED. IF EITHER CLUTCH IS DROPPED, ASSUME
THAT IT IS DAMAGED AND REPLACE IT.
WARNING
Use Club Car clutch holder
while tightening or loosening drive
clutch retaining bolt.
CLUTCH HOLDER
Hook clutch holder
on boss of pully
located behind drive
clutch...push down
on adjacent
boss with holder.
THREE BOSSES
IN GRAY
DRIVE CLUTCH
RETAINING BOLT
DRIVE CLUTCH
DRIVEN
CLUTCH
Insert drive clutch
puller into drive
clutch, then tighten
puller to remove
hub.
VEHICLE BODY
REMOVED FOR
CLARITY
DRIVE CLUTCH PULLER
(CLUB CAR
PART NO. 1014496)
CAUTION