FE290 ENGINE
Service Specifications
Page 13-50 2000 FE290 Gasoline Vehicle Maintenance and Service Supplement
13
ADJUSTMENTS AND SETTINGS
Starter/Generator Bracket to Block Bolts
M8
200 in-lb (23 N·m)
Oil Drain Plug
M14
20 ft-lb (27.1 N·m)
Fan Housing Screws
M6
90 in-lb (10 N·m)
Fan Shroud Screws
M6
25 in-lb (2.8 N·m)
Bolts Marked with “4” (When Used with Nuts)
M8
M6
M5
130 in-lb (15 N·m)
50 in-lb (5.9 N·m)
30 in-lb (3.4 N·m)
ITEM
LIMITS
Spark Plug Gap (Standard)
0.027 to .031 inch (0.69 to 0.79 mm)
Ignition Coil Air Gap (Standard)
0.012 inch (0.304 mm)
Oil Pressure (MIN.) at fast idle speed
45.5 psi (314 kPa)
Oil Filter: bypass-valve opening pressure
11.4 to 17.0 psi (78 to 118 kPa)
Compression Pressure (MIN.)
156 psi (1076 kPa)
Crankcase Vacuum (MIN.) at governed speed
1.18 inches (30 mmHg)
Cylinder Head-Gasket Surface Flatness (MAX.)
0.002 inch (0.05 mm)
Valve Clearance (IN. and EX.) when engine is cold
0.006 inch (0.15 mm)
Engine RPM
2700 RPM ± 30 (DS Golf Car, Villager 4)
2860 RPM ± 30 (Turf 1, Carryall 1)
ITEM
SIZE
SPECIFICATIONS