![background image](http://html1.mh-extra.com/html/club-car/fe290/fe290_maintenance-service-supplement_2626734208.webp)
UNITIZED TRANSAXLE
Unitized Transaxle Installation
Page 16-38 2000 FE290 Gasoline Vehicle Maintenance and Service Supplement
16
Unitized Transaxle Installation, Continued:
31. Check that all wiring is secured properly. See following WARNING.
32. Connect the spark plug wire.
33. Connect the battery cables, positive cable first and tighten to 20 ft-lb (27.1 N·m).
34. Adjust the engine RPM setting. See Engine RPM Adjustment, Section 14 – Fuel System, Page
14-14.
• IF WIRES ARE REMOVED OR REPLACED MAKE SURE WIRING AND WIRING HARNESS IS
PROPERLY ROUTED AND SECURED TO VEHICLE FRAME. FAILURE TO PROPERLY ROUTE
AND SECURE WIRING COULD RESULT IN VEHICLE MALFUNCTION, PROPERTY DAMAGE OR
PERSONAL INJURY.
Figure 16-97 Connect Shifter Cable
Figure 16-98 Engine Ground Wire
Figure 16-99 Connect Cable to Cam
Figure 16-100 Connect Fuel Line
WARNING
Pull spring release
back to connect shifter
cable to lever.
Tighten nuts.
TOP VIEW
Club Car
Connect engine ground wire
and tighten retaining nut.
Connect accelerator cable to
cam and tighten retaining nuts.
TOP VIEW
Club Car
Connect fuel line
and tighten clamp.