UNITIZED TRANSAXLE
Unitized Transaxle Removal
2000 FE290 Gasoline Vehicle Maintenance and Service Supplement Page 16-13
16
Figure 16-30 Driven Clutch
Figure 16-31 Governor Arm
Figure 16-32 Governor Cable Bracket
Figure 16-33 Accelerator Cable Bracket
Figure 16-34 Transaxle Mounting
Remove bolt and
mounting washer
from driven clutch.
Leave cable
connected.
Loosen nut. Then, with governor
and accelerator cables still attached,
remove the governor arm from the shaft.
Leave cable
connected.
Remove two screws
holding governor
cable bracket.
Remove two
screws holding
accelerator
cable retaining
bracket.
BRACKET
ClubCar
ClubCar
WOODEN
BLOCKS
TRANSAXLE MOUNTING NUT
TRANSAXLE MOUNTING
BOLT AND NUT
(TYPICAL 4 PLACES)
(TYPICAL 2 PLACES)