Chevrolet 10 Series 1970, Service Manual

Page: 132 / 671

BODY 1-54
1. V e n t W in d o w G lass
2. D iv is io n C h an nel
3. Access Panel
4 . Remote C o n tro l H a n d le
5 . Inside Lock Knob
6. W e a th e rs trip Seal C lip
and S crew
7. W e a th e rs trip Seal
8. Access Panel
DO O R W IN D O W REGULATOR
REPLACEMENT
Removal
1. R em ove access panel fr o m lo w er portion of door.
2. L o w e r window and re m o v e window regu la tor handle
and escutcheon plate.
3. W hile holding regu la to r assem bly through opening in
door, rem ove screw s retaining regu la to r assem bly
to door inner panel.
4. W hile guiding regu la to r arm to rem ove r o lle r fro m
window channel truck, (F ig . 126), c a re fu lly lo w er
regu la tor assem bly fro m door.
Installation
In stall door window regu la to r in r e v e r s e o rd e r of
D oor Lock Remote C o n tro l
Assem bly
D oor Lock M e chanism
Run C ha n n e l R e ta in e r S crew
Run C ha n n e l R e ta in e r
19. D oor W in d o w Stop Bumper
2 0 . W in d o w R e g u la to r Assy.
21. D iv is io n C han nel C e n te r
A tta c h in g S crew
“ R em oval” procedu res. B e fo re in stallin g access door,
operate regu la tor to be sure r o lle r is not binding in
window channel track.
DOOR W IN D O W GLASS REPLACEMENT
Removal
1. R em ove access panel fro m door inner panel below
vent window.
2. Unlatch vent window catch, then swing vent outward.
3. R em ove s c rew s attaching access trim panel to door
just below vent window.
4. R em ove fra m e to door sc re w and fra m e to division al
channel screw .
5. R em ove th ree d ivision channel lo w e r a t t a c h i n g
screw s.
F ig . 125— Door C om ponents
9. D iv is io n C ha n n e l Low er 15.
A tta c h in g Screws
10. Escutcheon Plates 16.
11. R e g u la to r H andle 17.
12. D iv is io n C h an nel U ppe r 18.
A tta c h in g Screws
13. D oor W in d o w
14. Sash C han nel
CHEVROLET TRUCK SERVICE MANUAL