manualshive.com logo in svg

Capintec CAPTUS 2000, Owner'S Manual

Share
Download
Capintec CAPTUS 2000 Owner'S Manual Download Page 62

CAPINTEC, INC 

CAPTUS

® 

2000 

PRINTING TEST RESULTS 

To print autocalibration and quality assurance test results, select the 

PRINT

 button from the 

main autocalibration screen.  The autocalibration history screen as seen in Figure 5-8 will 
appear. 
 
 

 

 

Figure 5-8 

 
 
The software has three printing options.  Immediate test results, complete history summary, 
or a selected section of the displayed results.  To print the most recent set of calibration and 
test information, choose Immediate Results from the Print Option box.  All of the raw count 
data and calculated results will be displayed for the last calibration measurement.  The 
detailed data stored in immediate results must be printed as soon as the tests for a given 
detector are complete.  Performing an autocalibrate measurement causes the detailed 
immediate result data to be erased.  Then only the stored summary information is saved and 
available for review.  Figure 5-9 is a sample printout of immediate test results which list those 
found during a normal daily calibration. 
 

5-10 

QUALITY ASSURANCE 

July 00 

Summary of Contents for CAPTUS 2000















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands