Capintec CAPTUS 2000, Owner'S Manual

Page: 14 / 206

CAPINTEC, INC CAPTUS
®
2000
Located on the left side of the Isolation Transformer is a label, (see Fig. 1-5), with two
caution statements pertaining to the main power cord of the Isolation Transformer. The
statement, READ INSTRUCTIONS CAREFULLY BEFORE CONNECTING TO OUTLET,
directs the user to the owners manual before connecting the power. The second statement
alerts the user to select an electrical power receptacle that is designated as HOSPITAL
ONLY or HOSPITAL GRADE, to insure reliable grounding is provided to the CAPTUS
®
system for electrical safety requirements.
Figure 1-5
CAUTIONS AND NOTES
CAUTION
Only qualified/trained personnel should operate or service this unit.
CAUTION
High voltage is present inside the Detectors (up to 1000 Volts). Due to the presence of these
high voltages, opening the covers with the system plugged in may be hazardous. Refer all
servicing to qualified personnel.
CAUTION
No internal adjustments inside the Detector, Computer or Printer that may be performed by
the user within the conditions of the warranty, except for changing the Isolation Transformer
fuse. Due to the presence of high voltages, opening the cover of the Computer with the
system plugged in may be hazardous. Refer all servicing to qualified personnel.
CAUTION
Never use the Well Detector without the well liner in place. Liners are inexpensive and easy
to replace. A contaminated Detector is a very costly mistake. If unit becomes contaminated
remove liner and clean unit as stated in CHAPTER 11: CLEANING AND MAINTENANCE
before operating.
CAUTION
Care must be exercised when moving the system or when maintenance is performed. The
system must not be inclined more than a 15 degree angle or tip over may occur.
CAUTION
Verify that the Collimator is correctly installed as stated in the Unpacking and Assembly
Instructions. Failure to follow these instructions could result in injury or product malfunction.
1-4 SAFETY July 00