Capintec CAPTUS 2000, Owner'S Manual

Page: 119 / 206

CAPINTEC, INC CAPTUS
®
2000
Figure 8-13
To proceed with the standard count, place the standard sample in the well counter and select
the
OK button. To cancel the procedure, select the Cancel button, and Figure 8-11 will
appear. After the count is completed, Figure 8-10 will appear and require confirmation of the
data.
Once the standard has been counted and data accepted and saved, the next step in the
counting sequence is the measurement of the patient’s urine. Figure 8-14 will appear.
Figure 8-14
To proceed with the patient’s urine count, place the urine sample in the well counter and
select the
OK button. To cancel the procedure, select the Cancel button, and Figure 8-11
will appear. After the count is completed, Figure 8-10 will appear and require confirmation of
the data.
Once the urine count has been completed and the data accepted and saved, Figure 8-8 will
appear again. PROCEDURE COMPLETE will appear in blue at the bottom of the spectral
display area, and only the
EXIT button will be active. Choose the EXIT button to return to the
Main Schilling Test Library screen.
Test Results
After completion of the measurement process, all raw count data and calculated results will
appear in the result display area. All sample counts, average counts (for two repetitions),
calculated result, and date and time of test will be displayed. Test results are expressed as
percent excretion which is calculated as follows:
July 00 LAB TESTS 8-11