manualshive.com logo in svg

Canon 6160, Operation Manual

The Canon 6160 User Manual is an essential tool for mastering the features and functions of this versatile product. With our easy-to-understand manual, available for free download on our website, users can confidently navigate through every aspect of the Canon 6160 and maximize their experience.

Share
Download
background image

Change the advanced media settings

Introduction

The advanced media settings enables you to print on certain special media.

When all the advanced media settings have their default value, the button for [Advanced media
settings] displays the word [Default]. After you changed one or more settings, this button
displays the word [Custom].

[Default] means that the [Low temperature mode] is [Off], [Double-sheet detection] is [On], the
[Enhanced media mode] is [Off] and the [Paper quality] is set to [Normal].

This section describes when it is recommended to change the advanced media settings.
Furthermore, this section describes how to change the settings.

When to do

[Low temperature mode]
• Pre-printed: The system is able to handle pre-printed media without problems if the guidelines

regarding pre-printed media and inks are taken into account. Contact your local Océ
representative to get a copy of these guidelines. In case media or inks are used that are not
listed in the guidelines, the use of pre-printed media can lead to undesired print quality issues.
To postpone print quality issues arising, a [Low temperature mode] is available on the printer.
It is advised to enable the [Low temperature mode] when there are problems with processing
pre-printed media. The interval between undesired print quality issues will then be increased
significantly (for some temperature sensitive inks, but no guarantee for all inks).
It is advised to enable the [Low temperature mode] when you process pre-printed media.
It takes several minutes until [Low temperature mode] is reached.
The [Low temperature mode] should not be enabled when you use media heavier than 120 g/
m

2

. This could lead to print problems.

• A secondary benefit (to pre-printed support) is to save energy. The preheater operates on a

lower temperature.

[Double-sheet detection]

Double-sheet detection warns you if 2 or more sheets have been separated from the media stack
in a paper tray at the same time. However, it is not always convenient to have the double-sheet
detection enabled, for example when you use transparent media with a cover sheet. Then you
can set the [Double-sheet detection] to [Off]. By factory default, [Double-sheet detection] is [On].

[Enhanced media mode]

Glossy media can cause a collating or stapling error in the finisher. You can set the [Enhanced
media mode] to [On] to prevent the error. This will decrease the productivity of the printer. By
factory default, the [Enhanced media mode] is [Off]. When you set the [Enhanced media mode] to
[On] and the printer status is [Printing...], the dashboard displays a message that the enhanced
media mode is enabled.

The [Enhanced media mode] is only available on printers that are equipped with an optional
finisher (see 

The output locations on page 29

).

[Paper quality]

Good media is best run with the highest paper quality setting: [Normal].

Lower grade media with respect to paper dust, such as some book papers for example, can leave
more paper dust in the printer. This can lead to ghost images on prints directly after the black
image cleaning procedure or to ghost images of previous pages on prints. When you use lower

Change the advanced media settings

Chapter 6 - Media handling

79

Summary of Contents for 6160































































































































































































































Reviews:

No comments

Related manuals for 6160

Panasonic Panafax UF-7000 Network Connection preview
Panafax UF-7000
Brand: Panasonic Pages: 28
Panasonic KX-PS8000 Setup Manual preview
KX-PS8000
Brand: Panasonic Pages: 68
Panasonic KX-MC6020 Instrucciones De Funcionamiento preview
KX-MC6020
Brand: Panasonic Pages: 120
Panasonic Workio DP-C262 Operating Instructions Manual preview
Workio DP-C262
Brand: Panasonic Pages: 100
Panasonic KX-MB781 - B/W Laser - All-in-One Instrucciones De Funcionamiento preview
KX-MB781 - B/W Laser - All-in-One
Brand: Panasonic Pages: 96
Panasonic Workio DP-6010 Operating Instructions Manual preview
Workio DP-6010
Brand: Panasonic Pages: 130
Oki 10i Maintenance Manual preview
10i
Brand: Oki Pages: 210
Panasonic FP-D355 User Manual preview
FP-D355
Brand: Panasonic Pages: 77
Panasonic FP-7818 Service Manual & Parts Manual preview
FP-7818
Brand: Panasonic Pages: 402
Panasonic DP-8020E Quick Manual preview
DP-8020E
Brand: Panasonic Pages: 54
Panasonic Workio DP-8016P Operating Instructions Manual preview
Workio DP-8016P
Brand: Panasonic Pages: 88
Panasonic DP-1510P Operating Instructions Manual preview
DP-1510P
Brand: Panasonic Pages: 60
Océ VarioPrint 1055 User Manual preview
VarioPrint 1055
Brand: Océ Pages: 194
Oce CS9360 Installation Manual preview
CS9360
Brand: Oce Pages: 12
QMS Magicolor 6100 Supplementary Manual preview
Magicolor 6100
Brand: QMS Pages: 2
Radio Shack TRS-80 Operation Manual preview
TRS-80
Brand: Radio Shack Pages: 57
Xante Accel-a-Writer 8300 Maintenance And Specifications preview
Accel-a-Writer 8300
Brand: Xante Pages: 12
Xerox 3635MFP - Phaser B/W Laser Evaluator Manual preview
3635MFP - Phaser B/W Laser
Brand: Xerox Pages: 16

Brands by name

Popular brands

Load more brands