Canon 6160 Operation Manual Download Page 151

Page: 151 / 222

Job

Job progress states

Suppressed output re‐
covery

End up in the output
location after error re‐
covery

Sheets copied to con-
troller memory (in-
cluding error pages).

Are deleted complete-
ly.

These sheets are not
delivered to the out-
put location.

Sheets jammed in the
machine.

The operator panel
displays instructions
on how to solve the
paper jam. The opera-
tor has to remove
these the jammed
sheets manually.

These sheets are not
delivered to the out-
put location.

Sheets in host memo-
ry.

Remain in host mem-
ory.

Once the error is re-
solved, the printer re-
starts by printing the
first page in the host
memory.

Output recovery in case of an error

Chapter 7 - Carry out print jobs

151

Summary of Contents for 6160































































































































































































































Search results

Summary of Contents for 6160

Reviews:

Related manuals for 6160

Brands by name

Popular brands

Canon 6160, Operation Manual

Search results

Summary of Contents for 6160

Reviews:

Related manuals for 6160

Brands by name

Popular brands