BLEMO ER24 Series, Programming Manual

Page: 239 / 344

Configuration Mode (ConF)
241
ER24 ER24
Counter wobble
Master drive Slave drive
Synchroniz at ion
Gearbox
Reel of yarn
Main shaft
Winding motor
Thread guide
Thread
The Counter wobble function is us ed in certain applications to obtain a cons tant yarn tens ion when the
Travers e control function is producing cons iderable variations in s peed on the yarn guide m otor
(
[Traverse freq. high] (trH) and [Traverse Freq. low] (trL) , s ee [Traverse freq. high] (trH) page
242 ).
Two m otors m us t be us ed (one m as ter and one s lave).
The m as ter controls the s peed of the yarn guide, the s lave controls the winding s peed. The function as s igns
the s lave a s peed profile, which is in antiphas e to that of the m as ter. This m eans that s ynchronization is
required, us ing one of the m as ter’s logic outputs and one of the s lave’s logic inputs .
Parameters described in this page can be accessed by:
DRI- > CONF > FULL > FUN- > TRO-
Cam
Thread guide motor
Gearbox