BLEMO ER24 Series, Programming Manual

Page: 100 / 344

Configuration Mode (ConF)
102
Code Nam e / De s cription Adjus tment range Factory s e tting
*

Torque limitation in generator mode, as a % or in 0.1% increments of the rated torque in accordance with the
[Torque increment] (IntP) parameter, page 216 .
See page 216 .
trH
*

[Traverse freq. high] 0 to 10 Hz 4 Hz
Traverse high. See page 242 .
trL
*

[Traverse freq. low] 0 to 10 Hz 4 Hz
Traverse low . See page 242 .
qSH
*

[Quick step High] 0 to [Trave rs e fre q. high] (trH) 0 Hz
Quick step high. See page 242 .
qSL
*

[Quick step Low] 0 to [Trave rs e freq. low] (trL 0 Hz
Quick step low . See page 242 .
Ctd

[Current threshold] 0 to 1.5 In (1) In (1)
Current threshold for
[I attaine d]
(CtA) function assigned to a relay or a logic output (see page 138 ). See page 252 .
ttH

[High torque thd.]
-300% to +300% 100%
High torque threshold for [High tq. att.] (ttHA) function assigned to a relay or a logic output (see page 138 ), as a % of the
rated motor torque. See page 253 .
ttL

[Low torque thd.]
-300% to +300% 50%
Low torque threshold for [Low tq. att.] (ttLA) function assigned to a relay or a logic output (see page 138 ), as a % of the rated
motor torque. See page 253 .
FqL
*
[Pulse warning thd.] 0 Hz to 20,000 kHz 0 Hz
Speed threshold measured by the
[FREQUENCY M ETER]
(FqF-) function, page 266 , assigned to a relay or a logic output
(see page 138 ). See page 253 .
Ftd

[Freq. threshold]
0.0 to 599 Hz HSP
Motor frequency threshold for [Fre q.Th.att.] (FtA) function assigned to a relay or a logic output (see page 138 ), or used by the
[PARA M. SET SWITC HIN G ] (MLP-) function, page 230 . See page 253 .
F2d

[Freq. threshold 2]
0.0 to 599 Hz HSP
Motor frequency threshold for [Freq. th.2 attained] (F2A) function assigned to a relay or a logic output (see page 138 ), or used
by the
[PARAM . SET SWITCHING]
(MLP-) function, page 230 . See page 253 .
FFt
*

[Freewheel stop Thd] 0.2 to 599 Hz 0.2 Hz
Speed threshold below which the motor w ill sw itch to freewheel stop.
This parameter supports switching from a ramp stop or a fast stop to a freewheel stop below a low speed threshold.
It can be accessed if
[Type of stop] (Stt) is set to [Fast stop] (FSt) or [Ra mp stop] (rMP) and if [Brak e assignm e nt ]
(bLC) and
[Auto DC inje ction]
(AdC) are not configured. See page 173 .
ttd

[Motor therm. level] 0 to 118% 100%
Threshold for motor thermal alarm (logic output or relay). See page 255 .
JPF

[Skip Frequency]
0 to 599 Hz 0 Hz
Skip frequency. This parameter helps to prevent prolonged operation within an adjustable range around the regulated frequency.
This function can be used to help to prevent a speed, w hich would cause resonance, being reached. Setting the function to 0
renders it inactive. See page
183 .
JF2
[Skip Frequency 2]
0 to 599 Hz 0 Hz
Parameters described in this page can be accessed by:
DRI- > CONF > FULL > SET-