BLEMO ER24 Series, Programming Manual

Page: 215 / 344

Configuration Mode (ConF)
217
Code Nam e / De s cription Adjus tment range Factory s e tting
tLC
*
[Analog limit. act.] [Ye s ]
(YES)
This parameter cannot be accessed if [Torque lim it. activ.] (tLA) is set to [No] (nO) .
Identical to
[Torque lim it. activ.]
(tLA) page 216 .
If the assigned input or bit is at 0:
The limitation is specified by the
[M otoring torque lim ]
(tLIM) and
[Ge n. torque lim .]
(tLIG) parameters if
[Torque limit . activ.] (tLA) is not [No] (nO) .
No limitation if [Torque limit. activ.] (tLA) is set to [No] (nO) .
If the assigned input or bit is at 1:
The limitation depends on the input assigned by
[Torque re f. as s ign.] (tAA) .
Note : If [Torque lim itation] (tLA) and [Torque re f. as sign.] (tAA) are enabled at the same time, the low est value w ill be
taken into account.
(1) The parameter can also be accessed in the
[SETTINGS]
(SEt-) menu.
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from w ithin the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
Parameter that can be modified during operation or w hen stopped.
*
