BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 79 / 222

Kick Time 1 CFN 12
LCD Display
Range 0.1 – 10.0 seconds (Default: 1.0 sec)
Description The Kick Time 1 parameter sets the length of time that the kick current level is applied to the motor.
The kick time adjustment should begin at 0.5 seconds and be adjusted by 0.1 or 0.2 second intervals until the
motor begins rotating. If the kick time is adjusted above 2.0 seconds without the motor rotating, start over
with a higher kick current setting.
z
NOTE: The kick time adds to the total start time and must be accounted for when setting the UTS time.
See Also Up To Speed (QST 09) on page 62
Start Mode (CFN 01) on page 63.
Kick Level 1 (CFN 11) on page 68.
Theory of Operation section 7.3.2, Programming A Kick Current on page 124.
Kick Level 2 CFN 13
LCD Display
Range
Off, 100 – 800% of FLA
(Default: Off)
Description The Kick Level 2 parameter sets the current level that precedes any ramp when a start is first commanded
when the second ramp is active. Refer to the Kick Level 1 (CFN 11) parameter on page 68 for description of
operation.
Kick Time 2 CFN 14
LCD Display
Range 0.1 – 10.0 seconds (Default: 1.0 sec)
Description The Kick Time 2 parameter sets the length of time that the kick current level is applied to the motor when the
second ramp is active. Refer to the Kick Time 1 (CFN 12) parameter on page 69 for description of operation.
See Also Kick Level 1 (CFN 11) on page 68.
Digital Input Configuration (I/O 01 - 08) on page 90.
Theory of Operation section 7.3.2, Programming A Kick Current on page 124.
Theory of Operation section 7.3.6, Dual Acceleration Ramp Control on page 128.
69
6 - PARAMETER DESCRIPTION
CFN: Kick Lvl 2
13
Off
CFN: Kick Time 2
14
1.0 sec
CFN: Kick Time 1
12
1.0 sec