BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 52 / 222

Alphanumeric Display
4.4 Alphanumeric Display
The remote LCD keypad and display uses a 32-character alphanumeric LCD display. All starter functions can be accessed by the
keypad. The keypad allows easy access to starter programming with parameter descriptions on the LCD display.
4.4.1 Power Up Screen
On power up, the software part numbers are displayed for a few seconds. Pressing any key immediately changes the display to the
operate screen.
4.4.2 Operate Screen
The operate screen is the main screen. The operate screen is used to indicate the status of the starter, if it’s running, what state it’s in, and
display the values of Meter 1 and Meter 2, which are selectable.
The Operate Screen is divided into five sections:
•
Sections A and B display status information
•
Sections C and D display the meters selected by the Meter 1 and 2 parameters, see FUN 01, 02
•
Section S displays the source for the start command
42
4 - KEYPAD OPERATION
810023-02-01
810024-01-01
K
S T
n
O
o
P
L
P E D
I
V
a
a
=
=
0 .0
0
A
V
SECTION S SECTION C
SECTION B SECTION D
SECTION A
Figure 25: Operate Screen
Display Description
NoL L1, L2, L3 not present
Ready Starter ready to run
Alarm A fault condition is present. If it continues, a fault occurs
Run Starter is running
Table 14: Operate Screen Section A