BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 40 / 222

Control Wiring
3.11 Control Wiring
3.11.1 Control Power
The 120VAC control power is supplied to TB1. The connections are as follows:
1 - Ground
2 - Neutral
3 - Neutral
4 - Line (120VAC)
5 - Line (120VAC)
3.11.2 Output Relays
TB2 is for output relays R1, R2 and R3. These relays connect as follows:
1 - NO1: Relay 1 normally open
2 - RC1: Relay 1 common
3 - NC1: Relay 1 normally closed
4 - NO2: Relay 2 normally open
5 - RC2: Relay 2 common
6 - NC2: Relay 2 normally closed
7 - NO3: Relay 3 normally open
8 - RC3: Relay 3 common
9 - NC3: Relay 3 normally closed
Terminal block J3 is for output relays R4, R5 and R6. These relays connect as follows:
1 - R4A: Relay 4 common
2 - R4B: Relay 4 open
3 - R5A: Relay 5 common
4 - R5B: Relay 5 open
5 - R6A: Relay 6 common
6 - R6B: Relay 6 open
See Also
Relay Output Configuration (I/O 10-15) on page 91.
30
3 - INSTALLATION
120VAC LIVE
120VAC NEUTRAL
TB1
Figure 13: Control Power Wiring Example
120VAC LIVE
120VAC NEUTRAL
TRIP
TRIP PILOT LIGHT
(RELAY 1 SET TO FLFS - FAULT FAILSAFE)
120VAC LIVE
120VAC NEUTRAL
STOP
RUN & STOPPED PILOT LIGHT
(RELAY 2 SET TO RUN)
RUN
TB2 TB2
Figure 14: Relay Wiring Examples