BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 208 / 222

Starter Status Register:
Watts, VA, vars, and kW hour Registers:
Meter registers present 32 bit meters in two consecutive 16 bit registers. The least significant 16 bits are in the first register followed by
the most significant 16 bits in the second register.
Reading the least significant register latches data into the most significant register so that the data remains synchronized between the
two.
Parameter Registers:
For those parameters that can be set either to “Off”, or some value within a range (many of the protection parameters, for example) there
are two Modbus registers. One is an “enable” register, and the other sets the value within the range.
198
APPENDIX F - MODBUS REGISTER MAP
Bit 0 – Ready
0: Initializing or
Faulted and decelerating or
Faulted and Braking or
Faulted and Stopped or
Lockout
1: Otherwise
Bit 1 – Running
0: Not Running
1: Running
Bit 2 –UTS
0: Not UTS
1: UTS
Bit 3 –Alarm
0: No alarm conditions
1: 1 or more alarm conditions
Bit 4 –Fault
0: No Fault Condition
1: Fault Condition
Bit 5 –Lockout
0: Start or Fault Reset not locked out.
1: Start or Fault Reset locked out. Possible causes are:
Overload Lockout State