BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 68 / 222

Parameter Descriptions
6.1 Parameter Descriptions
The detailed parameter descriptions in this chapter are organized in the same order as they appear on the LCD display.
Each parameter has a detailed description that is displayed with the following format.
Parameter Name MMM__
LCD Display
Range
Parameter Value
(Default: Constant)
OR
LCD
Keypad
Description The description of the function.
See Also Cross references to related parameters or other chapters.
Jump to Parameter QST 00
LCD Display
Description
By changing the value of this parameter and pressing [ENTER], you can jump directly to any parameter
within that group.
Motor FLA QST 01
LCD Display
Range 1 – 6400 Amps RMS (Default: 10A)
Description The Motor FLA parameter configures the motor full load amps, and is obtained from the nameplate on the
attached motor.
If multiple motors are connected, the FLA of each motor must be added together for this value.
z
NOTE: Incorrectly setting this parameter prevents proper operation of the motor overload protection,
motor over current protection, motor undercurrent protection, ground fault protection and acceleration control.
Motor Service Factor QST 02
LCD Display
Range
1.00 – 1.99
(Default: 1.15)
58
6 - PARAMETER DESCRIPTION
MMM: Parameter
MI Value
QST: Motor FLA
01
10 Amp
QST: Jump Code
00
1
QST: Motor SF
02
1.15