BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 214 / 222

Parameter Table
Following is the parameter table for both the LED and LCD Display. The last column is a convenient place to write down parameter
settings.
Quick Start Group
Control Function Group
Group LED Display Parameter Setting Range Units Default Page Setting
CFN 00 Jump Code Jump to Parameter 1 to 25 1 63
CFN 01 P10 Start Mode Start Mode
Voltage Ramp
Current Ramp
TT Ramp
Power Ramp
Tach Ramp
Current Ramp 63
CFN 02 P8 Ramp Time 1 Ramp Time 1 0 to 300 Seconds 15 64
CFN 03 P6 Init Cur 1 Initial Motor Current 1 50 to 600 %FLA 100 64
CFN 04 P7 Max Cur 1 Maximum Motor Current 1 100 to 800 %FLA 600 65
CFN 05 P24 Ramp Time 2 Ramp Time 2 0 to 300 Seconds 15 65
CFN 06 P22 Init Cur 2 Initial Motor Current 2 50 to 600 %FLA 100 65
CFN 07 P23 Max Cur 2 Maximum Motor Current 2 100 to 800 %FLA 600 66
CFN 08 P11 Init V/T/P Initial Voltage/Torque/Power 1 to 100 % 25 66
CFN 09 P12 Max T/P Maximum Torque/Power 10 to 325 % 105 67
CFN 10 Accel Prof Acceleration Ramp Profile
Linear
Squared
S-Curve
Linear 67
CFN 11 P13 Kick Lvl 1 Kick Level 1 Off, 100 to 800 %FLA Off 68
CFN 12 P14 Kick Time 1 Kick Time 1 0.1 to 10.0 Seconds 1.0 69
CFN 13 P25 Kick Lvl 2 Kick Level 2 Off, 100 to 800 %FLA Off 69
CFN 14 P26 Kick Time 2 Kick Time 2 0.1 to 10.0 Seconds 1.0 69
CFN 15 P15 Stop Mode Stop Mode
Coast
Volt Decel
TT Decel
DC Brake
Coast 70
CFN 16 P16 Decel Begin Decel Begin Level 100 to 1 % 40 70
CFN 17 P17 Decel End Decel End Level 99 to 1 % 20 71
CFN 18 P18 Decel Time Decel Time 1 to 180 Seconds 15 71
CFN 19 Decel Prof
Decel Ramp
Profile
Linear
Squared
S-Curve
Linear 72
CFN 20 P19 Brake Level DC Brake Level 10 to 100 % 25 72
CFN 21 P20 Brake Time DC Brake Time 1 to 180 Seconds 5 73
204
APPENDIX I - PARAMETER TABLES
LED LCD Display Parameter Setting Range Units Default Page Setting
P1 QST 01 Motor FLA Motor FLA 1 – 6400 RMS Amps 10 58
P2 QST 02 Motor SF Motor Service Factor 1.00 – 1.99 1.15 58
P3 QST 03 Running OL Motor Running Overload Class Off, 1 – 40 10 59
P4 QST 04 Local Src Local Source Keypad
Terminal
Serial
Terminal
59
P5 QST 05 Remote Src Remote Source 60
P6 QST 06 Init Cur 1 Initial Motor Current 1 50 – 600 %FLA 100 61
P7 QST 07 Max Cur 1 Maximum Motor Current 1 100 – 800 %FLA 600 61
P8 QST 08 Ramp Time 1 Ramp Time 1 0 – 300 Seconds 15 62
P9 QST 09 UTS Time UTS Time / Transition Time 1 – 900 Seconds 20 62