BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 118 / 222

Communication Byte Framing FUN 19
LCD Display
Range Even, 1 Stop (Default)
Odd, 1 Stop
None, 1 Stop
None, 2 Stop
Description The Communication Byte Framing parameter sets both the parity and number of stop bits.
See Also
Communication Address parameter (FUN 16) on page 107.
Communication Baud Rate parameter (FUN 17) on page 107.
Communication Timeout parameter (FUN 18) on page 107.
Software Version 1 FUN 20
LCD Display
Description This parameter shows the software version 1.
The software version is also displayed on power up.
Software Version 2 FUN 21
LCD Display
Description This parameter shows the software version 2.
The software version is also displayed on power up.
Miscellaneous Commands FUN 22
LCD Display
Range LCD Description
None No commands (Default)
Reset RT Reset Run Time Meter
Reset kWh Reset kWh/MWh Meters
Reflash Mode Activate Reflash Mode
Store Parms The current parameter values are stored in non-volatile memory
Load Parms All parameter are retrieved from non-volatile memory
Factory Rst All parameters are restored to the factory defaults
Std BIST Built In Self Test with no line voltage applied to the starter.
Powered BIST Built In Self Test with line voltage applied to the starter.
z
NOTE: Powered BIST not available on medium voltage starters.
108
6 - PARAMETER DESCRIPTION
FUN: Com Parity
19
Even, 1 Stop
FUN: Software 1
20
810023-02-01
FUN: Software 2
21
810024-01-01
FUN: Misc Command
22
None