BENSHAW RediStart EXEXMVRMX3 Series, User Manual

Page: 54 / 222

4.4.4 Meter Pages
Although any meter may be viewed by changing the two meter parameters (FUN 01, FUN 02), there are 19 “Meter Pages” that are easily
accessed to view all of the meter information. These meter pages are scrolled through by pressing the [UP] or [DOWN] down arrows
from the operate screen.
z
NOTE: Run Hours 00:00 – 23:59
Run Days 0 – 2730 days or 7.5 years
kWatt Hours 0 – 999
MWatt Hours 0 – 9999
Starts 0 – 65535
RS Gnd Cur % motor FLA
44
4 - KEYPAD OPERATION
Current I2= 0.0A
I1= 0.0 I3= 0.0A
Run Days = xxxx
Run Hours = xx:xx
Voltage V2= 0V
V1= 0 V3= 0V
Analog In = 0.1%
Analog Out = 0.0%
MWatt Hour = 0
kWatt Hour = 0
Starts = xxxx
Watts = 0
VA = 0
Temps Ts= ---
To= --- Tb= ---
Motor PF = 0.00
VARS = 0
1= Off 3= Off
2= Off 4= Off
TruTorque = 0
Power = 0%
5= Off 7= Off
6= Off 8= Off
Overload = 0%
Curr Imbal = 0.0%
9= Off 11= Off
10= Off 12= Off
RS Gnd Cur = 0%
ZS Gnd Cur = 0.0A
13= Off 15= Off
14= Off 16= Off
LST ST Tim = xx.xs
PK ST Cur
= xx.xA
hh:mm:ssA
mm/dd/yy
Frequency = 0.0H
Phase = noL