Barco Event Master E2 Lite, User Manual

Page: 210 / 330

R5909934 /00 E2 Lite and EC-40 210
10.1 General
Overview
The EC-40 is a wing-concept in the sense that it needs a host computer to work. Host computers specs should
follow the outline for the Event Master Toolset
“ Preferred ” spec.
10.2 EC-40 controller connection
Prerequisites
Event Master Toolset revision 6.4 must be installed on the Host computer prior to the connection of the EC-40.
Verify that the Host computer is equipped with the latest software version available on the Barco
web site (URL:
https://www.barco.com/ ). Refer to the chapters “ Download of Event Master Toolset
Software ” , page 67 and “ Software installation ” , page 68 for more information on the software
downloading and how install it on the Host computer.
Connection diagram
Image 10-1: EC-40 connections
Description
Connect the external screen and USB communication from the host computer to the HDMI In and USB B
connector on the EC-40.
Plug the cord to the power outlet.
Necessary cables are provided in a new system. In the case that the original cables are missing, simply use
standard computer cabling to make these connections.
10.3 Touchscreen calibration
General
The EC-40 needs a host computer. Calibration of the touchscreen could be necessary if your touchscreen
responses are inaccurate or erratic.
Controller Configuration