Barco Event Master E2 Lite, User Manual

Page: 75 / 330

R5909934 /00 E2 Lite and EC-40 75
Image 6-9: System diagram area
In this area, the rear panel of the selected system is represented graphically with the cards, and the
connectors are color coded to indicate their status.
The color code is:
• White = Connector available to add and configure.
• Gray = Connector capacity set to NONE and is unavailable to add and configure.
• Purple = Connector capacity set to SPLIT; connector 3 mirrors connector 1 (and connector 4 mirrors
connector 2), and connector is unavailable to add and configure.
Split-mode may be used with the DisplayPort connectors on the quad channel DisplayPort output card and
the SDI connectors on the tri-combo output card.
• Red = Signal unavailable and connector configured into system.
• Yellow = Signal available.
• Green = Signal available and connector configured into system.
On the right hand side of the devices is a list of the created destinations (Screen and Auxiliary).
The tabs on the top allow access to the different systems connected to the EM GUI. The last tab allows the
users to create a new system.
A set of zoom buttons allows the user to reduce or enlarge the view size. This functionality is very useful when
the system is composed of more than one device.
How to create a new system
1. Click on the Add New System tab on the top.
A new empty tab is created.
2. Drop a device on this system. Refer to the procedure to add a device in the section “ Configuration Menu >
Network resource area ” , page 72.
3. Change the system name to avoid confusion when you control more than one system on the same Event
Master Toolset Software.
Double click on the tab, the tab background changes to a dark blue color indicating that modifications to the
name can be made.
How to remove system
1. Click on the “ X ” button on the system tab.
EM GUI orientation