Barco Event Master E2 Lite, User Manual

Page: 163 / 330

R5909934 /00 E2 Lite and EC-40 163
Image 6-73: Settings Menu Overview
1 Resources area The Resources area contains the Options,
Controller, and Devices tabs.
• The Controller tab shows EC-50 / EC-40 /
EC-30 settings and is applicable only when
an EC-50 / EC-40 / EC-30 controller is
connected on the network.
• The Devices tabs shows what Barco devices
(such as projectors) are detected on the
network.
• The Option tab allows the user to choose
settings concerning the Event Master Toolset
Software.
Please see the sections below dedicated to
these options.
2 Status Show status:
• Online : the VP is online and the web
application can be reached.
• Web application error : the VP is online but
the web application cannot be displayed.
• Offline (in red text): the VP is offline.
3 Refresh Web app area button Similar to web browser, pressing this button will
trigger an attempt to refresh / reconnect to the
web interface of the selected VP.
4 System select combo box Informs the users which System is currently
being selected. If there is more than 1 System
defined in the UI, this combo box can be used to
select between the different Systems.
5 Device select combo box Informs the user which Device is currently being
selected in the selected system.
6 Web app area Main work area where the different menus are
displayed.
Note: Web app control from the Settings Menu is
not available on the E2 Lite processor.
EM GUI orientation