Barco Event Master E2 Lite, User Manual

Page: 38 / 330

R5909934 /00 E2 Lite and EC-40 38
4.3 Dual link DVI input card
General
The dual link DVI input card includes two DVI-I dual-link connectors that can support a single or dual-link DVI
video signal.
Although the DVI-I connectors includes pins that support analog signals, the DVI card doesn't
support analog signals. If you need to connect an analog signal to the unit, you need to employ an
external A/D converter.
The figure below illustrates the dual link DVI input card's rear panel connectors:
Image 4-5: Dual Link DVI Input Card Rear Panel
1 DVI-I dual-link connector — DVI 1 with an LED that turns on green when a valid sync has been
detected
2 DVI-I dual-link connector — DVI 2 with an LED that turns on green when a valid sync has been
detected
Features
• Process up to 2 signals independently
• 2x DVI-I dual-link connector
• Support for single or dual-link DVI video signal
• Each input channel includes an LED that turns green when a valid sync is detected.
Specifications
• DVI 1.0 Specification
• Maximum H Active: 4,096, Maximum V Active: 3,072
• Supported format:
- All single link DVI formats up to 165 MHz
- All dual link DVI formats up to 330 MHz
- 4K/UHD Supported:
◦
3,840x2,160/ 23.98/24/25/29.97/30 input via 1x DVIDL, 2x DVISL (L and R half) or 4x DVISL
(quadrants)
Hardware orientation