Barco Event Master E2 Lite, User Manual

Page: 171 / 330

R5909934 /00 E2 Lite and EC-40 171
12. Configuration Menu > Layer optimization . For more information see section “ Configuration Menu > Layer
optimization ” , page 183.
13. Configuring Menu > Add Aux Destinations . For more information see section “ Configuration Menu > Add
Aux Destinations ” , page 184.
14. Configuring Menu > Add MVR Outputs . For more information see section “ Configuration Menu > Add MVR
Outputs ” , page 186.
15. Programming Menu > Capture Stillstore from Inputs . For more information see section “ Programming
Menu > Capture Stillstore from Inputs ” , page 187.
16. Programming Menu > Select Thumbnails for Inputs . For more information see section “ Programming
Menu > Select Thumbnails for Inputs ” , page 188.
17. Programming Menu > Create Sources from Inputs . For more information see section “ Programming Menu
> Create Sources from Inputs ” , page 188.
18. Programming Menu > Drop backgrounds into Screen Destinations . For more information see section
“ Programming Menu > Drop backgrounds into Screen Destinations ” , page 189.
19. Programming Menu > Drop Layers into Screen Destinations & Sources into layers . For more information
see section “ Programming Menu > Drop Sources, Layers into Screen Destinations & Sources into layers ” ,
page 189.
20. Programming Menu > Drop Inputs to Aux Destinations . For more information see section “ Programming
Menu > Drop Inputs to Aux Destinations ” , page 191.
21. Programming Menu > Presets And User Keys . For more information see section “ Programming Menu >
Presets And User Keys ” , page 191.
22. Programming Menu > Destination Transition . For more information see section “ Programming Menu >
Destination Transition ” , page 193.
23. Multiviewer Menu > Drop Inputs and Destinations . For more information see section “ Multiviewer Menu >
Drop Inputs and Destinations ” , page 193.
7.3 Power up and Status check
General
Use the following steps to power up your Event Master series processor and check system status.
Prerequisite
• Ensure that your system is properly installed and cabled.
• Ensure that you are familiar with the System Menu . For details on all menus, please refer to chapter “ Front
Panel Menu orientation ” , page 47.
Power up system and check system status
1. Turn on the unit and wait while it initializes. During the initialization process the front panel displays: “ Program
Loading Please Wait ” .
The Status Menu is automatically displayed after initialization is completed.
2. Power up all peripherals, such as display devices (projectors, monitors) and sources.
3. Turn on the PC and run the Event Master Toolset Software.
The system configuration page is the first page that appears when the Event Master Toolset Software is
launched.
4. On the Status Menu:
• System1 is the default value displayed as System Name if this is the first start of the unit. This name can
be changed in the configuration page of the GUI.
• Ensure the Event Master series processor is connected on the local network. If there is no internet
connection, or if a DHCP server has not been found, the IP address is 000.000.000.000. In this case, re-
System Setup