Barco Event Master E2 Lite, User Manual

Page: 59 / 330

R5909934 /00 E2 Lite and EC-40 59
Image 5-19
The Diagnostics options allow a user to check if the Event Master unit is functioning normally. Front panel and
card operations can be checked. Various system temperatures can be monitored and backup log files can be
saved for customer service troubleshooting.
Front Panel
When Front Panel is selected to be tested, the VFD display will initially be blanked. Then the 24 x 4 character
grid will start to show from the dimmest setting to the brightest setting. At this point a user can determine if any
of the pixels or if a character segment is bad in the display.
After several seconds of showing all pixels on at the brightest setting, the system will automatically advance to
the
ENCODER/BUTTON TEST menu (the next menu).
Directly select “ Encoder/Button ” from the Diagnostic menu will allow the user to test the keys and
knob without the need to see the VFD being tested.
Encoder/Button
Image 5-20
The ENCODER/BUTTON TEST menu allow the user to test the keys and knob.
When the knob on the front panel is rotated, a number will be displayed on the encoder line. The larger the
number, the faster the knob was rotated. The number will show as positive or negative depending on the
direction the knob was turned.
Pressing any key on the front panel will show the Button Code for the key.
Button Code
ESC 0
PWR 7
SEL 14
Hold ESC to exit and return to the DIAGNOSTIC menu.
Front Panel Menu orientation