Barco Event Master E2 Lite, User Manual

Page: 137 / 330

R5909934 /00 E2 Lite and EC-40 137
Image 6-50
When the layer is selected and is visible on the canvas, it will have a blue highlight around the layer.
2. Click on the Adjust tab that is on the top of the adjustment area.
The layer adjustment panel is displayed.
It is possible to select multiple layers by clicking on the each targeted layer once Multiple Select is
set to ON.
Layer adjustment panel description
The Layer adjustment panel allows access to general layer adjustments and takes effect only if a layer is
selected.
Layer adjustments are performed on individual layers. When multiple layers are selected, the
adjustments are disabled.
The upper part of the panel is always visible:
This part includes:
• Layer type : Layer can be a PIP or a Key. The
available adjustments depend on the selected
mode.
• Keyframes : There are 2 KeyFrames per layer.
The lower part of the panel provides menus for layer sizing and color adjustments
• Main adjustment : Border
• Layer Window adjustment: Size, Position, Mask
• Layer Color Effects adjustment: Brightness,
Contrast, Gamma, Hue, Saturation, Monochrome,
Invert
Note: Layer Color Effects are not available on the
E2 Lite processor.
PIP / KEY selection
The first selection is the choice for the layer type: PIP or a Key. Depending on the selection, the rest of the
menu will adapt.
Layer adjustment panel > Main adjustment
The Main adjustment panel is variable according the Layer type.
Layer type = PIP (Border Tab) :
This menu allows users to adjust the PIP borders.
EM GUI orientation