Barco Event Master E2 Lite, User Manual

Page: 150 / 330

R5909934 /00 E2 Lite and EC-40 150
6.28 Programming Menu > Adjustment area >
Source adjustment
General
The Source adjustments are shown on the Adjust panel when a layer with a valid Source is selected. The
Source adjustment controls does not appear when you select the Source by itself. Also note that the
adjustments made here are made on the layer
’ s copy of the Source, not the actual Source itself. The actual
Source is updated only when the “ Save Source ” is pressed.
Description
When a layer with a valid Source is selected, 2 adjustment tabs are shown. It defaults to showing the layer
adjustments. But the user can click on the Source adjustment tab to see the adjustments mentioned in this
section.
Two Tabs for Source adjustment:
• Main adjustment : Size, position, Aspect ratio, and Bind to User Key.
• Color adjustment: Contrast, Brightness, Gamma, Hue and Saturation
Main adjustment
The following Source Adjustment Menu functions are
provided: (All figures are in pixels)
• H Size: adjusts the source ’ s horizontal size.
• V Size: adjusts the source ’ s vertical size.
• H Position: adjusts the source ’ s horizontal
position.
• V Position adjusts the source ’ s vertical position.
• Save Source would save the Source information
from the selected layer to the actual Source
Note that the “ Custom aspect ratio ” is disabled unless
the “ Default Layer Aspect Ratio ” is set to Custom.
EM GUI orientation