Barco Event Master E2 Lite, User Manual

Page: 132 / 330

R5909934 /00 E2 Lite and EC-40 132
1 Moves the selected layer up in priority and swaps with the layer previously above.
2 Moves the selected layer to the top of the priority and swaps it with the layer previously on top.
3 Moves down in priority and swaps the z-order of the selected layer with the layer previously below.
4 Moves the selected layer to the bottom of the priority and swaps it with the layer previously at the
bottom.
Example :
Image 6-41
Only the visual priority (on Preview) of the two layers changes. The layers remain at their current
locations
— only the priority changes.
Size and Position
Image 6-42: Size and Position adjustments
1 Full Screen Vertical takes the selected PIP(s) to full screen, using the source ’ s height as the guide.
If borders are on, they will be taken into account so that they are visible.
2 Full Screen Horizontal takes the selected PIP(s) to full screen, using the source ’ s width as the
guide. If borders are on, they will be taken into account.
3 Fill H/V will stretch the selected layer over the whole destination size not respecting the aspect of the
source.
EM GUI orientation