Barco Event Master E2 Lite, User Manual

Page: 62 / 330

R5909934 /00 E2 Lite and EC-40 62
The file name will be “ E2LogFiles.tar.gz ” , and it can be found on the USB stick under the “ E2
\backup ” directory.
5.12 System menu > Lock front panel
General
When the Event Master unit ’ s front panel is locked, button presses have no effect. In the locked mode:
• All button presses (including Power ON/OFF button) and all turns of the ADJUST knob are ignored.
• All Ethernet communications commands function normally.
How to enable and disable the front-panel lock?
1. On the System menu, scroll to Lock Front Panel and press SEL . The front panel is locked, and the following
message appears:
Image 5-29: Front Panel Locked Message
2. To disable the front panel lock, press and hold the SEL and ESC buttons simultaneously for 3 seconds. When
the panel is unlocked, the display screen displays the Status menu.
5.13 Using the Tech Support menu
General
The Tech Support Menu, shown in the following illustration, provides quick access to Customer Support
contact information, and also shows you the software version for your Event Master unit.
Image 5-30
This menu displays:
• The software version of your Event Master unit . For more details on software upgrade instructions please
refer to the chapter
“ Updating firmware ” , page 195.
• The US Customer Support telephone number. This number is accessible from 6 a.m. to 10 p.m. (PST), 7
days per week. The European customer support number is: 0800-90-0410. In China call: 40088-22726. All
other regions, call your local Barco support.
• The Customer Support web site address for all regions.
5.14 Restoring Factory Default Settings
General
As shown in the following illustration, two options in the Setup Menu allow you to restore the Event Master unit
to its factory default condition.
Front Panel Menu orientation