Barco Event Master E2 Lite, User Manual

Page: 112 / 330

R5909934 /00 E2 Lite and EC-40 112
Data-doubling submenu — Expert Mode
The top part of the panel is the same in Expert Mode
as it is in Basic Mode. Expert Mode, however, offers
greater control over horizontal and vertical Offset and
Size. Expert Mode also allows the user to add Outputs
without increasing the canvas size and to place those
Outputs anywhere within the canvas.
• Data Doubling H or V Overlap width: The
adjustment can be made by moving the slider,
entering the value manually in the box, or clicking
on the plus and minus.
Note: The Overlap sliders are disabled, until at
least one overlapping area is selected. Gray
overlaps are unselected; blue overlaps are
selected. Individual overlaps can be selected by
clicking on the desired overlap in the output image.
All overlaps can be selected by clicking on the
Select All button.
• Once an overlap is created, H and V offset can be
adjusted for Left, Right, or Center justification over
the Background.
• The Area of Interest (including H Size and V Size)
is duplicated here from the Output tab, so that the
user can adjust the AOI and the X/Y Offset
together.
• The icons above the sliders are shortcuts for the
offset.
EM GUI orientation