Ametek Amrel PLA 2U, Operation Manual

Page: 71 / 162

M470039-01 REV-F Page 70
2)
Press the LOCAL key on the front pa nel, a nd rota te the encoder

to scroll to the “SYSTEM” menu option.
3)
Press ENTER to select.
4)
Choose “ETHERNET” and Press ENTER to select option.
5)
Select “ADDRESS” and press ENTER to select option.
6)
jrEnter the IP a ddress obta ined from your network a dministra tor a nd press ENTER.
7)
Choose “NETMASK” by rotating the encoder 
to scroll a nd press ENTER to select option.
8)
Enter the va lue obta ined from your network a dministra tor a nd press ENTER.
9)
Choose “GATEWAY” by rotating the encoder

to scroll a nd press ENTER to select.
10)
Enter the defa ult ga tewa y IP a ddress obta ined from your network a dministra tor a nd press ENTER
To Exit, press LOCAL to go ba ck to the sta rt-up screen
The Ethernet Port Number is 3000.
Plea se conta ct AMETEK Progra mma ble Power Technica l Support for a ny a dditiona l Ethernet Set -up Question.
USB FUNCTION
The eLoa d a lso provides a USB remote interfa ce to connect to your computer. You need to insta ll USB driver
included in a CD-ROM shipped with your eLoa d .
After your USB driver is installed, the USB port is converted to a virtual COM port. Refer to the “ Verify Installed
USB Driver using Hyper Terminal (Windows XP/2000/98)” section for detailed procedures on how to verify the
USB driver.
Windows XP USB Driver Installation Procedures
Note: You must have administrative privileges to install the USB driver
1) Connect eLoa d Unit using USB ca ble
2) Click on found new ha rdwa re bubble (bottom right ha nd corner of screen)
3) Found New Ha rdwa re Wiza rd insta lla tion window will pop up