Ametek Amrel PLA 2U, Operation Manual

Page: 48 / 162

M470039-01 REV-F Page 47
Model Type Fuse Rating Specification Location
PLW6K
2.5A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW9K
4A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW12K
4A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW18K
4A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW24K
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW36K
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW48K - Slave
10A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW48K - Master
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW60K - Slave
10A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLW60K - Master
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-2U
2.5A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-3U
4A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-4U
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-6U
8A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-8U-Master
10A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
PLA-8U-Slave
6.3A/250V Slow Blow Externa l Fuse (Benea th the AC recepta cle)
TABLE 2.2 – FUSE REPLACEMENT SPECIFICATIONS
AC INPUT POWER CONNECTION
Disconnect AC power from the instrument before removing the cover. Even with the front panel power switch in
the OFF position, live line voltages are exposed whe n the cover is removed and the AC cord is attached. Re pairs
must be made by experienced service technicians only.
NOTE: REMOVING THE TOP COVER OR DISASSEMBLING THE UNIT WILL VOID THE WARRANTY.
JJJJJJ
There is a pote ntial shock hazard if the electronic load chassis a nd cover are not connec ted to a n electrical ground
via the safety ground in the AC input connector. Ensure that the electronic load is connected to a grounde d AC
outlet with the recommended AC input connector configured for the available line voltage.
AC INPUT CONNECTOR AND VOLTAGE SELECTION
To prevent damage to the electronic load, turn off AC power to the unit before changing from one AC input
voltage range to another. Example 115Vac to 230Vac.
eLoa d series ha s a n a uto ra nge selection function. This function a llows you to connect to either low or high AC input
volta ge without ma king a ny a djustment to the unit.
WARNING
WARNING
CAUTION