Ametek Amrel PLA 2U, Operation Manual

Page: 120 / 162

M470039-01 REV-F Page 119
■
ONCE Causes the STEP to advance only one point after each trigger. Triggers that arrive during a
dwell delay are ignored
■
AUTO Causes the entire STEP to be executed sequentially after the starting trigger, paced by its
dwell delays. As each dwell delay elapses, the next point is immediately executed.
Command Syntax STEP:CURRent:STATe <NR1>
Parameters 0 | OFF(0) | 1 | ON(1) | 2 | AUTO(2) | 3 | ONCE(3)
Query Syntax STEP:CURRent:STATe?
Returned Parameters <NR1> 0=OFF
1=ON
2=AUTO
3=ONCE
NOTE : Plea se refer to the eLoa d Progra mming ma nual a nd Opera tion Ma nua l for further Step Opera t ion a nd
comprehensive Step SCPI Comma nds.
6. OSC Range Selection
The OSC Range selection now includes D DEFAULT, D OSC1, D OSC2 &
D OSC3. With the new selections, the eLoad provides more bandwidth selections for applications
with dc load + ac perturbation. The DISABLE OSC range will stop detection of oscillating conditions; in the
case ac + dc inputs are required for testing applications.
Product used with oscillation protection turned off may cause product failure. Failure occurring as a result of
oscillation application or turn-off of this feature will not be covered under warranty.
Local Control
MENU
LOAD CONTROL
➔
OSCILLATE
➔
OSC CONTROL
➔
DEFAULT
➔
OSC1
➔
OSC2
➔
OSC3
➔
DEFAULT + DISABLE
➔
OSC1 + DISABLE
➔
OSC2 + DISABLE
➔
OSC3 + DISABLE
CAUTION