Ametek Amrel PLA 2U, Operation Manual

Page: 116 / 162

M470039-01 REV-F Page 115
Typical eLoad Turn-on Sequence
1) Close External Contactor/Relay
2) DUT output On (During Delay)
3) eLoad input On
Typical eLoad Turn-off Sequence
1) eLoad input Off
2) DUT Output Off (During Delay)
3) Open External Contactor/Relay
Local Control
MENU
➔
LOAD CONTROL
➔
INPUT CONTACTOR
➔
CONTROL
➔
DISABLE
➔
PORT0 + @ ON
➔
PORT0 - @ ON
➔
DELAY
➔
50ms ~ 500ms
Remote Programming
[SOURce:]INPut:CONtactor
This comma nd configures the INPUT CONTACTOR Mode
Command Syntax INPut:CONtactor <mode>
Parameters 1: DISABLE | 2: PORT0+ @ ON | 3: PORT0+ @ ON
Query Syntax INPut:CONtactor?
Returned Parameters 1 | 2 | 3
[SOURce:]INPut:CONtactor:DELay
This comma nd configures the INPUT CONTACTOR Mode
Command Syntax INPut:CONtactor:DELay <delay-time>
Parameters 50 ~ 500ms
Query Syntax INPut:CONtactor:DELay?
Returned Parameters 50 ~ 500ms
4. Ultra-low CC & CP and Ultra-high CR Ranges (Optional Feature)
Project requirements are dynamic and over a long time span and often it may need high-current applications
one day and ultra-low current applications the next. AMREL eLoad offers an Ultra-low range CC and CP
mode and an Ultra-high range CR mode utilizing a unique dual-shunt design which provides precise, accurate,
high-resolution and repeatable measurements in thousands of Amps and down to tens of Amps in a single box.
The purchase of a single system over the lifetime of the project will yield incredible cost savings in ROI and
satisfy dynamic application demands.
Constant Current Ultra Low (CCUL) Range –
•
Programming Accuracy: .05% of S .05% of CCUL Max Current
•
Read back and Measurement: .05% of R .05% of CCUL Max Current
•
Resolution: 14 Bits