Ametek Amrel PLA 2U, Operation Manual

Page: 136 / 162

M470039-01 REV-F Page 135
APPENDIX A: PEL & PLA/PLW COMMAND COMPATIBILITY TABLE
PEL & PLA/PLW Driver Compatibility Configuration
For PEL a nd PLA/PLW driver compa tibility, the following procedures a re needed.
1. Power on unit
2. Utility
→
Profile
→
Reca ll
→
1
3. Reca ll profile 1
4. Exit Menu
5. Run ARPEL progra m (progra m ca n be insta lled from the driver file from the CD-ROM or the FTP site)
6. Configure GPIB a ddress/RS-232 Speed
7. Click Sta rt
The ARPEL p rogra m provides simple click a nd select menus to control functions on the load a s well a s a comma nd
prompt for entering SCPI comma nds.
PEL & PLA/PLW Command Compatibility Table
The ta ble on the next pa ge is to expla in the d ifference between the PEL a nd PLA/PLW comma nd synta x a nd pa ra meters.
Under the “PEL Syntax & Parameters” and “PLA/PLW Syntax & Paramet ers” columns, it lists the commands that will
need a djustments when entering it. Plea se refer to the following ta ble for PEL a nd PLA/PLW comma nd syntax
descriptions: