Ametek Amrel PLA 2U, Operation Manual

Page: 26 / 162

M470039-01 REV-F Page 25
Mode and Menu Navigation
Mode a nd Menu Na viga tion
1) In meter mode, press CV, CC, CR, or CP Hot Keys to ma ke a mode selection.
2) In meter mode, press RANGE from the Front Key Pa d to enter into ra nge selection mode.
3) Press RANGE a ga in to ma ke a ra nge selection from Low, Middle, High or Auto.
4) The first row displa ys the currently selected mode a nd ma in va lue
5) The second row displa ys the currently selected ra nge.
6)
Press “ENTER” key to confirm range, and go back to meter mode.
7)
Press “CLEAR” key to go back to meter mode.
8) Press encoder, sa me a s CLEAR key.
9) Press a nd hold encoder, simila r to ENTER key.
Function selection mode
1) In meter mode, press FREQ, DUTY, or SLEW Hot Keys to enter into a n edit mode.
2) Press SLEW to ma ke a selection between rise time a nd the fa ll time.
3) Press DUTY to configure the duty cycle.
4) Press FREQ to configure the frequency.
5) Rota te

the encoder to edit va lue by ea ch decima l pla ce.
6)
Press “CLEAR” key to go back to meter mode.
7) Press encoder, sa me a s CLEAR key.
8) Press a nd hold encoder to enter a nd a ccept a va lue.
Menu mode
1)
Press LOCAL/MENU key, or press a nd hold encoder to enter into menu mode.
2)
Rota te

the encoder to select menu item.
3)
Press “ENTER” or press and hold the encoder to accept the setting.
4)
Press “CLEAR”, or press encoder to go back to meter mode.
Note: Please refer to the front panel menu tree section for detailed menu selections.
Pa nel Lock
1)
When LCD is in “Menu Mode”, select “PANEL LOCK” can set PANEL ENABLE, and PANEL PASSSWORD.
2)
When “PANEL ENABLE” is set to OFF, power off the PD unit and power on again, the local panel is disabled.
All other keys are locked except “LOCAL” key. When these keys are pressed, LCD displays “LOCAL
LOCKED”.
3)
Press “LOCAL” key, users must enter PASSWORD. If the PASSWORD is correct, the LCD goes back to
normal state. Press “ENTER” key and “LOCAL” key in the same time locks all the keys again.
4)
If users forget the password, they can use “555555” as default password.
List step edit mode
1) When LCD displa y is in meter mode, press STEP key from Front Key Pa d to enter into step edit mode.
2) Press STEP key to ma ke a selection between Time edit or Va lue edit of a step.
3) Press a nd hold the encoder to enter a nd a ccept the setting of a step.
4) Rota te

the encoder to select step point one by one.
5)
Press “VALUE (9)” key to edit step value.
6)
Press “CLEAR” key to go back to meter mode.