Agilent Technologies 4284A, Operation Manual

Page: 389 / 460

Caution
The in terface b oard con tains electronic comp onen ts that can b e
damaged b y static electricit y through electrostatic disc harge(ESD).
T o prev en t ESD damage,main tain frequen t con tact with an y bare
sheet metal surface on the c hassis. A grounding wrist strap (or
similar device) is useful for this purp ose. Handle the b oard carefully
at all times. Av oid touc hing electronic comp onen ts or circuit paths.
Note
Before p erforming step 8, note the jump er settings in order to return
them to the same settings at the end of this function test.
8. Set the jump ers on the handler in terface b oard to the same
settings as when the b oard is shipp ed from the factory . Congure
the in terface b oard according the color of the extractors, see
step (1) for ORANGE and BLA CK extractors and step (2) for
ORANGE and RED extractors.
(1) ORANGE and BLA CK (See Figure 10-13.)
OPEN (remov e): W1, W2, W3, W5, W6, W8, W9, W10,
and R101 thru R121
SHOR T: W4, W7, and W11
Figure 10-13. Jumper Settings
P erformance T ests 10-27