Agilent Technologies 4284A, Operation Manual

Page: 147 / 460

Figure 4-23. SEQ mode and STEP mode
Note
When t w o or more sw eep p oints are the same, and are adjacen t the
4284A measures the device once, and then the measuremen t result is
compared to limits set for eac h sw eep p oint.
Front P anel Operation for Setting the List Sw eep Measurement Mode
P erform the following steps to set the list sw eep measuremen t mo de
to the sequen tial mo de, or to the step mo de.
1. Mov e the cursor to the MODE eld. The follo wing softkeys will
b e display ed.
NNNNNNNNNNN
SEQ
NNNNNNNNNNNNNN
STEP
2. Select and press a softkey to set the list sw eep measuremen t mo de.
List Sw eep P arameter
Description
The sw eep p oint parameter for the list sw eep measuremen t can b e set
to the test frequency , oscillator lev el, and DC bias. This eld allo ws
y ou to set the parameter of the list sw eep measuremen t.
Front P anel Operation for Setting the List Sw eep P arameter
P erform the following steps to set the list sw eep parameter.
1. Mov e the cursor to the FREQ [Hz] ( LEVEL [V] , LEVEL [A] ,
BIAS [V] , or BIAS [A] ) eld. The following softkeys will b e
display ed.
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
FREQ [Hz]
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LEVEL [V]
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LEVEL [A]
NNNNNNNNNNNNNNNNNNNNNNNNNN
BIAS [V]
MEAS SETUP Menu 4-51