Agilent Technologies 4284A, Operation Manual

Page: 311 / 460

:Secondary LIMit
:Secondary LIMit
The :Secondary LIMit command sets the low/high limit v alues for
the comparator function secondary parameter. The :Secondary
LIMit? query returns the curren t settings of the secondary
parameter low/high limit v alues.
Command Syntax
COMParator:SLIMit <low limit >, <high limit >
Where,
<low limit > is the NR1, NR2, or NR3 format : low limit v alue
<high limit > is the NR1, NR2, or NR3 format : high limit v alue
Note
The low limit v alue should b e low er than the high limit v alue. If the
low limit v alue is set higher than the high limit, a w arning message is
display ed when this command is receiv ed (an error do es not o ccur).
Example
OUTPUT 717;"COMP:SLIM 0.001,0.002"
Query Syntax
COMParator:SLIMit?
Query Response
Returned F ormat is:
<NR3>,<NR3><NL^END>
Example
10 OUTPUT 717;"COMP:SLIM?"
20 ENTER 717;A,B
30 PRINT A,B
40 END
Command Reference 8-71