Agilent Technologies 4284A, Operation Manual

Page: 270 / 460

FUNCtion Subsystem
:DEV<n >:REFerence
The :DEV <n >:REFerence command sets the reference v alue for
deviation measuremen t. The :DEV <n >:REFerence? query returns
the curren t reference v alues.
Command Syntax
FUNCtion:DEV <n>:REFerence <value>
Where,
<value> is the NR1, NR2, or NR3 format
<n > is :
1 (decimal 49) Reference v alue setting for primary parameter
2 (decimal 50) Reference v alue setting for secondary parameter
Example
OUTPUT 717;"FUNC:DEV1:REF 10"
OUTPUT 717;"FUNC:DEV2:REF 2E-3"
Query Syntax
FUNCtion:DEV <n>:REFerence?
Query Response
Returned format is :
<NR3><NL^END>
Example
10 OUTPUT 717;"FUNC:DEV1:REF?"
20 ENTER 717;A
30 PRINT A
40 END
:DEV<n >
:REFerence:FILL
The :DEV <n >:REFerence:FILL command executes a single
measuremen t and en ters t w o measured v alues (the primary and
secondary parameters) in to eac h of the reference v alues for the
deviation measuremen t.
Command Syntax
FUNCtion:DEV <n>:REFerence:FILL
Where, <n > is
1 or 2 (Both reference v alues are measured simultaneously .)
Example
OUTPUT 717;"FUNC:DEV1:REF:FILL"
8-30 Command Reference