ABB ACQ810, Firmware Manual

Page: 217 / 376

Parameters 217
Sunday Time period 1 ends on Sunday. 7
36.19 Boost signal Boosting can be used to extend the timer enable signal for
the time defined by parameter
36.20 Boost time . The boost
time starts when the boost signal changes state from 1 to 0.
DI1 Digital input DI1 (as indicated by 02.01 DI status , bit 0). 1073742337
DI2 Digital input DI2 (as indicated by 02.01 DI status , bit 1). 1073807873
DI3 Digital input DI3 (as indicated by 02.01 DI status , bit 2). 1073873409
DI4 Digital input DI4 (as indicated by 02.01 DI status , bit 3). 1073938945
DI5 Digital input DI5 (as indicated by 02.01 DI status , bit 4). 1074004481
Const Bit pointer setting (see Terms and abbreviations on page
109 ).
-
Pointer
36.20 Boost time Boost time. See parameter 36.19 Boost signal .
00:00:00 …
24:00:00 Boost time. 1 = 1 s
(24:00:00 =
86400)
36.21 Timed func1 Selects which time periods (1…4) are used with timed
function 1. Also determines whether boost is used with timed
function 1.
The parameter is a 16-bit word with each bit corresponding
to a function. Whenever a bit is set to 1, the corresponding
function is in use.
The bits of the binary number correspond to the following
functions:
36.22 Timed func2 Selects which time periods (1…4) are used with timed
function 2. Also determines whether boost is used with timed
function 2.
The parameter is a 16-bit word with each bit corresponding
to a function. Whenever a bit is set to 1, the corresponding
function is in use.
The bits of the binary number correspond to the following
functions:
No. Name/Value Description FbEq
Bit Function
0 Timer1 ena (Time period 1 enable)
1 Timer2 ena (Time period 2 enable)
2 Timer3 ena (Time period 3 enable)
3 Timer4 ena (Time period 4 enable)
4 Boost ena (Boost enable)
Bit Function
0 Timer1 ena (Time period 1 enable)
1 Timer2 ena (Time period 2 enable)
2 Timer3 ena (Time period 3 enable)
3 Timer4 ena (Time period 4 enable)
4 Boost ena (Boost enable)