manualshive.com logo in svg

Zeiss Axioscope 5, Инструкция по эксплуатации

Поделиться
Скачать
Zeiss Axioscope 5 Скачать руководство пользователя страница 63

ZEISS

4 Installation | 4.1 Unpacking and Setting up the Microscope

4 Installation

Perform only the installation work described in this document. All other installation work not de-
scribed may only be carried out by an authorized ZEISS service representative.

4.1 Unpacking and Setting up the Microscope

Procedure

1. Open the packaging.
2. Take the microscope, all assemblies and accessories out of the packaging.
3. Check them for completeness as per delivery note.
4. Check all parts for damaging.
5. Place the microscope on a vibration-free, level and non-inflammable surface.

It is recommended to keep the original packing and store it away for later use, e.g. for stowing
the microscope during periods of non-use or for returning the microscope to the manufacturer for
repair.

Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001

63

Содержание Axioscope 5













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды