Zeiss Axioscope 5, Инструкция по эксплуатации

Страница: 164 / 204

10 Accessories and System Expansions | 10.8 Loading the Reflector Module ZEISS
10.8 Loading the Reflector Module
10.8.1 Assembling Reflector Modules
To ease the use and the recovery of reflector modules, the modules should be installed to defined
positions. The insert positions' numeric markings can be used to identify the modules.
2
3
1
5
4
Fig. 75: Replacing reflector modules
1 Reflector insert 2 Reflector module
3 Retaining bracket (left/right) 4 Lower spring clip (left/right)
5 Upper spring clip (left/right)
Procedure
1. Remove the reflector insert [
}
68]
1
from the upper part of the stand.
2. Put the reflector insert aside with the top side facing down.
3. NOTICE Avoid touching optical surfaces.
Carefully insert the module
2
(with the top side facing down) with the aid of its retain-
ing brackets
3
at a slant from the top into the lower spring clips
4
.
4. Press the module against the upper spring clips
5
of the reflector insert until it engages
firmly.
5. Install the reflector insert.
Proceed in the reverse order for removal.
164 Instruction Manual ZEISS Axioscope 5, Axioscope 5/7 MAT | en-US | Rev. 13 | 430035-7344-001