72
multi
MAUS
WARNING
: In order to accommodate the new features in the limited program memory of the
multi
MAUS
, the X-BUS master and DCC master had to be removed. This means that from
version V2.00, the
multi
MAUS
can only be used on the “slave” socket of the digital amplifi er
(ROCO 10761, ROCO 10764) which is no longer available. However, with control centres
with complete features, this does not result in any disadvantages.
4.4.1. DCC locomotive functions from F0 to F31
With
multi
MAUS
fi rmware version V
2.00, the switchable DCC locomotive functions can
be extended from F0 to F31. The entire range form F0 to F31 can be used with the
Z21 from FW V1.42 or on control centres from other manufacturers with XpressNet V4.0.
+
While (as you already know) you can switch to menu mode by holding down the Shift button
and pressing the MENU button, holding down the MENU button and pressing the Shift button
now opens the selection of the desired
function group
in reverse order:
• Select “FG3” to see or change the state from F31.
The
symbol now fl ashes three times in succession, followed by a short pause.
The state of F31 is indicated by the function symbols “1” and can be changed.
• Select “FG2” to see or change the state of F21 to F30.
The
symbol now fl ashes twice in succession, followed by a short pause.
The state of F21 to F30 is indicated by the function symbols “1” - “10” and can be changed.
Alternatively, the function group for F21 to F30
can also be selected as usual by briefl y
double-clicking the - button.
• Select “FG1” to see or change the state from F11 to F20.
The symbol now remains permanently visible.
The state of F11 to F20 is indicated by the function symbols “1” - “10” and can be changed.
Alternatively, the function group for F11 to F20 can also be reached as usual by holding
down the Shift button.
• Select “FG0” to see or change the state from F1 to F10. The symbol is then hidden.
The state of F1 to F10 is indicated by the function symbols “1” - “10” and can be changed.
By briefl y pressing the Shift button, you can exit the currently selected function group at any
time in normal driving mode and return to the lowest level (F1 to F10).
The
multi
MAUS
automatically detects how many DCC locomotive functions the control centre
can manage. The function groups “FG1”, “FG2” or “FG3” are only offered in the selection menu
if the control centre is actually capable of these high locomotive functions.
MENU
Part 4 - Appendix
