52
multi
MAUS
The “0” button is a space when pressed once,
the “0” appears after pressing twice. You will fi nd
special characters (/, –, \,
*
, [ , ], ‹, ›) if you press
the “1” button again and again. Correct input
errors by going back one or more spaces with
the left arrow button.
Confi rm with OK.
The
multi
MAUS
then changes to the locomo-
tive address. A “suggested value” is displayed,
here “3”.
Change the “suggested value” either by using
the Shift button and an arrow button or by enter-
ing the number directly using the function but-
tons.
This change only affects the library name assign-
ment! You must change the decoder address
using CV1 (see „Quick programming“ on page
57
).
Confi rm with OK.
The selection of the speed steps is done with
the arrow buttons. You have 3 options to choose
from: 14, 28 or 128 speed steps. The factory
setting is 28 speed steps. If you have selected
a different preset in the “SETTINGS” menu, it
appears on the display.
If you switch to 128 speed steps, the locomotive
can be controlled with a high level of sensitivity.
Modern decoders allow for this fi ne control.
If no change is to be made, simply press OK.
Pressing the OK button for the last time adds
the locomotive to the library. Just check that the
locomotive address in the library is identical to
the address stored in the locomotive decoder.
If necessary, reprogram the locomotive address
(see „Quick programming“ on page
57
).
The locomotive can now be controlled.
1
0
or
1
0
/
+
/
Part 2 - Operation of the
multi
MAUS
